Blackberry 8800 Unlock Code Entry Instructionssns
How to Enter Unlock Codes on BlackBerry 8800 Pearl:
***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****
1. Go to settings menu => and then Options
3. Select Advanced options => and then Sim card
5. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
6. Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
8. You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from NewMobileFreedom.com and press in the track wheel / jog dial to confirm
9. Your phone is now unlocked
Blackberry 8100 Unlock Code Entry Instructions
How to Enter Unlock Codes on BlackBerry 8100 Pearl: - Go to Options Menu => Advanced Options
- In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
- You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2 (*You won't see any text while you are typing either one of these.)e.)
- Enter the unlock code.
Blackberry 8700 Unlock Code Entry Instructions
How to Enter Unlock Codes on BlackBerry 8700:
8700c Unlocking Info
***** You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an AT&T or Cingular Sim card in the phone ( Can be active or inactive ) Make sure the phone is not displaying the low battery warning! *****
- go to settings
- go to options
- go to advanced options
- go to sim card
- Type MEPD (not case sensitive) (you will not see text appear on screen while typing)
- Does it say Network active? if so your phone is locked
- Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing)
- It will say "Enter Network MEP Code, then you type in the 16 digit unlock code, press in the jog dial to confirm.
- Your phone is now unlocked
BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.. Unlock Code Instructions
How to Enter Unlock Codes on BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc..
- Select Options menu on BB.
- Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
- Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'.
- Usually u should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code.
NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2 Now you should see the place to enter your net unlock code.(if not, you didn't type in mep2 or mepp2 properly.) - Here you must enter the "NET Unlock Code" that the bb unlocker showed you and hit return.
Treo 680,650 600 Unlock Code Entry Instructions
How to Enter Unlock Codes on Treo 600, 650 and 680 Cell Phones
- Remove Treo battery, unplug cable
- Insert incorrect SIM card (Any simcard that the phone does not accept)
- Power on Treo-650, 'Sim not allowed' is displayed, click OK
- Go to the dial pad, and use the stylus to enter MEP code . You must enter the code in the following fashion:
- *#*#(MEP-CODE)# then press dial (Where (MEP-CODE) is to be replaced by the ACTUAL code supplied by the unlocking software)
- For example if the software supplied 12345678 as your MEP code for your phone , you must enter the code as follows:
*#*#12345678# , then press dial
Again the above numeric code is for illustration purposes, please enter the MEP code as supplied by the unlock software.
- Phone will reset and display sim lock removed
TREO 750 Unlock Code Entry Instructions
How to Enter Unlock Codes on the Treo 750
- Insert a non native sim card (didn't come with the phone) and when prompted for unlock code enter the code you were given.
Cingular BlackJack Unlock Code Entry Instructions
How to Enter Unlock Codes on a Cingular BlackJack - Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted
-
- NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
- Power on your Phone
- Enter *#1546792*#
- Select Option 3 Network & Call Settings
- Select option 5 Network Mode
- Select GSM
This should resolve your problem.
HP iPaq Unlock Code Entry Instructions
How to Enter Unlock Codes on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 , etc) - On the Today screen, tap Start > Settings.
- Tap the Phone Band icon.
- Tap the Keyboard icon to open the virtual keyboard
- Tap Shift and then Ctl key to enable the keys.
- Tap the blank area below the band selection box to open the unlock tool.
- Tap Shift and then Ctl to disable the keys.
- Enter the 8-digit unlock code and tap OK when done.
- Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
- Unlock successful.
- Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
- Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
Sony-Ericsson Unlock Code Entry Instructions
How to Enter Unlock Codes on Sony-Ericsson Cell Phones - Switch ON your phone without Sim card
- Press 1 time the left arrow
- Press 2 times the button *
- Press 1 time the left arrow
- 'Personalize with MNC2' will appear
- You can now enter your unlock code
-
- If your phone has a 'JOGDIAL' (ex : SonyEricsson K700i) you must press 'Down arrow' instead of 'Left arrow' for step 2 & 3. We mean by 'Down arrow'' to direct the Jogdial down.
Motorola Subsidy Unlock Code Entry Instructions
How to Enter Subsidy/Unlock Codes on Motorola Cell Phones
IMPORTANT: You have five tries to enter this code into your phone. If you go beyond the five tries unsuccessfully your phone will not be able to be unlocked via code. you will need software and usb cable. http://www.newmobilefreedom.com/software-unlock-p-115.html - Switch ON your phone with a not allowed Sim card (one that didn't come with the phone)
- the phone show 'Enter Special Code' or 'Enter Subsidy Code' and you can now enter your unlock code
-
- Note: If you get the prompt "Contact Service Provider" or "Phone Blocked" , please leave your phone on at that prompt for upto 8 hours. This will reset the phone's internal timer and automatically change the prompt to "Enter Subsidy Code" , at which point you should enter the unlock codes exactly as provided.
LG Unlock Code Entry Instructions
How to Enter Unlock Codes On LG Mobile Phones
- Model : LG F2250
- With orange sim card in the start menu tape : 2945#*3311# handset show saved then return to startup screen press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK' tape your unlock code and OK.
- Model : LG U8110
- With a not allowed sim card in your phone enter Pin code then validate tape : 277634#*#, select 'Sim Unlock' menu enter NCK code then validate, your phone is now unlocked.
- Model : LG U8210
- With a not allowed sim card enter Pin code then validate tape : 277634#*#, now you show test menu choose Sim test menu and tape : 2945#*#, choose Sim Unlock menu, handset show 'Enter NCK' tape code Simlock, then OK.
- Model : LG U8150
- Switch ON your phone with a not allowed Sim card, compose : 277634#*#, go to menu 'Sim Lock' and enter your unlock code.
- Model : All Others
- Switch ON your phone with an allowed sim card and compose :
- 2945#*5101# - LG 510w
- 1945#*5101# - LG 1200 & B1200
- 2945#*5221# - LG 5200 & 52200
- 2945#*5301# - LG 5300
- 2945#*5401# - LG 5400
- 2945#*70001# - LG 7020
- 2945#*7101# - LG 7100
- 2945#*1201# - LG 1100 & 1300
- 2945#*70001# - LG 7250T & 1100
- 2945#*2201# - LG C2200
- 2945#*5301# - LG T5100
- 2945#*3311# - C3310
- Go to 'Menu' and then to 'Settings', select 'Security', to finish select 'Network Provider' and select 'Desactivate' then type your unlock code.
LG CU-500 Unlock Code Entry Instructions
How-To Enter Unlock Codes on LG CU500 mobile phones: - Insert a non-Cingular SIM card into your LG CU 500 and power on your phone
- When you get the invalid sim-card message/prompt, enter 159753#*# on your phones keypad
- On the next screen enter the unlock code provided than press OK.
Samsung D807 Unlock Code Entry Instructions
How-To Enter Unlock Codes on a Samsung D807 mobile phone: - Switch on your phone with a non-accepted SIM card. The phone will ask for 'Password'.
- You can now enter your unlcok code. (Even if phone doesn't ask for a password, enter the unlock code)
- If 'Insert Correct SIM card' message appears: enter #0111*code#
|
